Stainless Steel Clips For WPC Decking

All ‘T’ piece stainless steel and plastic WPC deck fixings come in packs of 50 along with 50 stainless steel screws. The plastic fixings will create a 5mm gap, the stainless steel clips will create a 6mm gap between your composite deck boards.

From: £9.50

Though decking reviews
Tough decking payment gateways

The best composite decking fixings are our stainless steel clips & fixings. They are easy to use, strong, reliable and weatherproof for fitting plastic decking boards down. Installed clips are below the deck surface between boards out of view. This leaves a clean unmarked surface. Boards can if needed to be lifted at a later date without damaging the surface. Both clips and screws are stainless steel so will not rust or degrade over time.

Both starter clips and T clips are easy to use. We recommend making sure you select a log narrow Philips or PZ2 drill driver bit suitable for the screw head. This type of driver head will make installation much easier. Starter clips come in packs of 10. Board fixing T clips come in packs of 50.

Each starter clip or T clip comes with 1 x stainless steel screw. And it is recommended that they are placed 370mm apart. Which means we would recommend 6-7 t-piece fixings per composite board.

Fitting instruction are provided with all kits but call us should you need further assistance. Our time and advice is free.

Plastic Decking Boards & Accessories

Why not take a look at our composite decking colours Anthracite Grey, Stone Grey, Charcoal or Chocolate Brown. Match them to your decking colour or mix it up a little. There are some fantastic examples of mixed decking designs out there and the possibilities are endless. Remember, our T-piece fixings and starter clips are all stainless steel. Once you try them out you will never look back.

Additional information


Metal Decking Clips, Deck Board Clips, WPC Decking Clip, Stainless Steel Decking Clips


There are no reviews yet.

Be the first to review “Stainless Steel Clips For WPC Decking”