No products in the basket.
Walnut Brown Capped Composite Step Nosing Board
£32.39 Inc. VAT
£26.99 Ex. VAT
ORDER FREE SAMPLE PACK HERE!
Free Delivery – Orders Over £1,200 + VAT
Applies To Zone 1 Only – See Delivery Page For Other Zones.
Applies To Zone 1 Only – See Delivery Page For Other Zones.
- ALL IN STOCK – Rapid 2–3 Working Day Delivery
- Tough Deck – 2nd Generation Elite Capped Step Nosing
- Protected by Advanced Tough Shield Technology
- Features Embossed Woodgrain Tread & Smooth Drop Nose Face
- Provides A Sleek Integration For Steps & Picture-Frame Borders
- When Used With Capped Board – Creates ~190mm Riser / ~290mm Tread
- 📏 Length: 2.2m (2200mm)
- 📐 Top Tread Width: 145mm (21mm Depth)
- 📐 Drop Lip Depth: 42mm
Walnut Brown Elite Capped Composite Step Nosing
A Rich, Warm Hardwood-Look Edge for Stairs, Borders & Raised Decks
Our Walnut Brown Elite Capped Composite Step Nosing finishes steps, staircases and picture-frame borders in a rich, warm brown that echoes natural hardwood. It is built to run alongside our Walnut Brown Elite boards for a seamless finish from tread to edge.
Steps and outer edges take the heaviest footfall and the worst of the weather, and a thin trim quickly looks tired. This capped nosing gives a warm, professional bullnose edge in a deep walnut tone that suits brick and stone houses, traditional and established gardens, and any scheme after a natural hardwood look without the upkeep.
Like every board in our Elite range, this step nose is wrapped in Tough Shield Technology, a fully bonded polymer shell over a heavy-duty composite core. That outer barrier keeps the edge scuff-resistant, slip-resistant and sealed against moisture exactly where foot traffic is heaviest.
Whether you are edging a traditional garden deck, a set of wide entrance steps or a raised terrace on an older property, this profile brings the warm, timber-look finish a classic scheme calls for.
Planning a complex step layout? Step returns and riser clearances can take a bit of extra thought during subframe construction. Give our team a call before cutting your timber, and we can run through the exact spacings with you.
📞 Call us: 01803 313211
✉️ Email us: sales@toughdecking.co.uk
Designed for High Footfall & Weather Exposure
Made from our dense blend of 60% Recycled Wood Fibre and 40% High-Density Plastic and sealed in the Tough Shield cap, this profile will Never Rot, Split, or Warp under heavy use.
Sure Footing on Wet Steps: Grip matters most on stairs, especially through a damp UK winter. The embossed tread and rounded front edge give your foot something to key into, cutting the slip risk where it counts.
UV & Weather Resistance: Because the profile is fully capped, it shrugs off the UV fade and weathering that catch out uncapped boards. The warm, deep Walnut Brown holds its rich hardwood tone from day one, with none of the silvering and splitting real timber suffers or the fade cheaper composite drifts towards.
Scuff & Stain Resistance: Mud, boots and dragged furniture always hit the step edge first. The outer shield stops it griming in, so a busy edge cleans down with nothing more than warm soapy water and keeps that warm walnut tone looking its best.
Walnut Brown Finish: Colour-matched to our Walnut Brown Elite deck boards. A rich, warm brown with a 3D embossed woodgrain on the tread for grip, running into a smooth drop nose for a clean edge.
Every Elite step nosing is backed by our full 15-Year Commercial & Domestic Guarantee.
Complete Your Step Build
Matching Deck Boards & Installation Fixings
Combine your step nosing with our main Elite Capped Composite Boards, or check our Fixings for a clean, secure hold.
⚠️ Essential Step Installation Notes
Standard Step Dimensions: Pairing 1 step nosing with 1 full 145mm board behind it creates a comfortable ~290mm tread depth. Combined with a 145mm riser board, this gives a standard ~190mm step rise, so there’s no need to cut boards down their length on site.
Subframe Support: Always ensure the step nosing overhang is fully supported by an additional joist or solid timber double-noggin beneath the stair tread front edge.
300mm Joist Spacing: Stair risers and step joist centres must not exceed 300mm to ensure rigid support along the nosing edge and maintain guarantee compliance.
Need advice setting up your step risers or tread depths? Speak with our Technical Team on 01803 313211.
Recommended Accessories & Fixings:
Elite Capped Step Nosing Features
- Fast Shipping: 2-3 Working Day UK Delivery (Next-Day Options)
- Walnut Brown Finish – Embossed Woodgrain Tread with Smooth Drop Nose
- Stain & Scuff Resistant – Non-Porous Shield Wipes Clean Easily
- UV-Protected Surface to Prevent Colour Fading & Weather Shift
- Smooth Rounded Front Bullnose Profile for Clean Stair Edges
- Advanced Tough Shield Technology Polymer Protection
- Ideal for Domestic Garden Steps, Balconies & Commercial Entrances
- High Anti-Slip Resistance for Wet UK Weather Conditions
- Backed by Our Comprehensive 15-Year Guarantee
- Low Maintenance & Easy Wipe-Clean Surface
- Rot-Proof – Will Not Split, Warp, or Splinter
Technical Specifications
- 📏 Dimensions: 2200mm (L) x 145mm (W) x 21mm (D)
- 📐 Vertical Drop Nose Lip: 42mm
- 📐 Typical Tread Depth: ~290mm (Nosing + 1x 145mm Board)
- 📐 Typical Step Rise: ~190mm (Nosing + 1x 145mm Riser Board)
- ⚖️ Heavy-Duty Solid/Capped Hybrid Profile
- 📦 Suitable for Composite Stair Treads & Perimeter Picture Framing
Unmatched UK Trade & DIY Support
All Elite step components are covered by our 15-Year Guarantee. Whether you are building a single step or a complete multi-level deck, our Torbay-based team is on hand with practical advice.
With 20+ years of composite decking expertise, we help installers and homeowners achieve a flawless, safe finish every time.
Note To The Trade: Contractors, landscapers, and joiners looking for trade pricing or bulk project quotes can reach out directly to our sales desk.
Contact our technical team today:
📞 Call us: 01803 313211 | ✉️ Email us: sales@toughdecking.co.uk
Decking Calculator
📐 Decking Calculator
0.00 Total Area (m²)
0 Boards Required
Technical Information
About The Step Nosing
Walnut Brown is the warm, rich brown in our Elite capped range, a deep hardwood tone that suits traditional gardens and brick or stone surroundings. Like the rest of the range it is fully shielded with Tough Shield Technology, so a protective polymer shell completely encapsulates the board core, giving a UV-locked colour, a wipe-clean surface, and long-term protection against staining where foot traffic is highest.
Designed for stair treads, perimeter picture-framing and raised deck edges, this board carries a heavy-duty 42mm drop-nose lip that forms a clean, safe bullnose and removes the need for separate corner angle trims. The top tread is finished with a deep 3D embossed woodgrain for anti-slip traction, running smoothly into a flat drop face.
The core is the same dense 60% recycled wood fibre and 40% high-density plastic blend used across our range. The cap is bonded during manufacture rather than applied afterwards, which prevents lifting, peeling or delamination over time.
Board Sizes & Specifications
- Length: 2200mm (2.2m)
- Top Tread Width: 145mm
- Board Depth: 21mm
- Drop Lip Depth: 42mm
- Weight: approx. 6.2kg per board
- Usage: Edging, stair treads, risers & picture-frame borders
How It Performs On Steps
Stains and spills: Step edges take the brunt of heavy footfall, BBQ drips and outdoor mess. The non-porous shield means oils, mud and drinks wipe straight off rather than soaking in. Where uncapped step trims absorb grime over time, this Elite nosing simply wipes clean.
Colour Consistency: The Walnut Brown tone is UV-locked during manufacture, so the rich brown you fit stays put and matches your Walnut Brown deck boards, with no silvering or weathering-in period.
Surface Scuffs & Safety: Step edges take heavy foot impact, and the durable cap stands up to boots, furniture scrapes and pets. Underfoot, the deeply embossed woodgrain tread gives reliable anti-slip grip in wet UK conditions.
Looking after it: An occasional wipe-down with warm soapy water and a soft broom is all it needs. No staining, painting or annual sealing.
Fitting & Sub-frame Requirements
Step nosing installations take a bit more sub-frame preparation than standard flat decking:
300mm Joist Centres: Stair risers and step joist centres must not exceed 300mm apart to ensure full structural support and keep the 15-year warranty valid.
Front Overhang Support: Always ensure the step nosing overhang is fully supported underneath by a double joist or timber noggin directly below the step edge.
Step Geometry: Pairing 1 step nosing board with 1 standard 145mm Elite board behind it creates a comfortable ~290mm step tread depth. Combined with a 145mm vertical riser board, this gives a standard ~190mm step rise without needing to cut down their length on site.
Compatible Clip Systems:
- Starter Clips: Ideal for securing the front overhang or starting the first board on a step tread.
- Stainless Steel X-Clips: Preferred hidden fixing for a tight 3–4mm joint, perfect for vertical step risers and step nosing seams.
- Stainless Steel T-Clips: Standard hidden fixings used along the rear grooved edge to join the main deck boards.
- Plastic T-Clips: A budget option for domestic step and decking installations.
Where It’s Used
Walnut Brown step nosing suits traditional and established gardens, brick and stone properties, and any scheme after a warm, natural hardwood look. It is the choice for a rich timber-style edge with total safety underfoot and none of the maintenance real wood demands.
15-Year Guarantee & Technical Support
Every Elite step nosing carries our full 15-year domestic and commercial guarantee (subject to the 300mm joist spacing requirement).
If you are planning a complex stair layout, step returns, or want to double-check sub-frame clearances before cutting timber, give our Torbay team a call on 01803 313211 or email sales@toughdecking.co.uk. You’ll speak to someone who knows the product inside out.